Trades

Welder salary in Dubai: from helper to 6G pipe welder

A welder's pay in Dubai depends on the process, the position and the test, not only the years. This guide shows how pay climbs from helper to 6G pipe welder, foreman and inspector in Disha's open listings.

A welding helmet with a dark visor, an electrode holder, a steel plate with a bright weld seam throwing sparks and a short pipe section on a dark navy workbench

“I have not trodden through the conventional regular course which is followed in a university course, but I am striking out a new path for myself.”

Srinivasa Ramanujan, in his first letter to G. H. Hardy, 16 January 1913

Ramanujan wrote that he had not followed the regular course, yet he was sure of the path he was making. A welder's path is the same: nobody asks for a degree, they ask you to weld, and the test decides your band. This guide explains welder salary in Dubai as Disha's open listings show it, from the helper who learns on the floor to the 6G pipe welder and the inspector, so you can see where your skill sits and what the next step needs. Disha's listings are for the UAE; your offer letter names the emirate and the site.

AED 1,000 to 1,700a month in Disha's open Welder and Fabricator Helper listing, no trade qualification needed
AED 2,500 to 4,500a month in the 6G TIG/ARC Pipe Welder listing, which asks for 3 years
AED 4,000 to 8,000a month in the Welding Foreman listing, which asks for 10 years
12:30 to 3 pmno outdoor work in the UAE from 15 June to 15 September

Sources: Disha's open listings, read October 2026 (all pay is indicative, set by the employer); UAE midday work ban, WAM, 2024.

How much does a welder earn in Dubai?

It depends on what you can weld and what you can prove. Disha's open welding listings in the UAE run from AED 1,000 for a helper to AED 10,500 for a fabrication foreman, and the gap is mostly about process, position and papers. A TIG welder listing shows AED 2,000 to 3,800 a month (about ₹51,900 – ₹98,600, indicative). The 6G TIG/ARC Pipe Welder listing shows AED 2,500 to 4,500 a month (about ₹64,800 – ₹1,16,700, indicative).

These are listed ranges, not promises. The employer decides the final figure after your test and interview, and it appears in your written offer. Read the split between basic wage and allowances first, because overtime and gratuity are worked out on the basic. Our guide to UAE salary, overtime, leave and gratuity explains how.

Welder salary in Dubai by level: from helper to inspector

The table lines up the main welder listings from helper to inspector; the full set, including the fabrication foreman and supervisor roles, is on the welder jobs hub. Each pay range is the listing's own and each experience figure is the minimum the listing asks for.

Role in the listingPay a month (AED)Experience asked
Welder and Fabricator Helper1,000 to 1,700None; no trade qualification
ARC Welder, MIG Welder1,500 to 2,8002 years
Structural Welder1,700 to 3,2002 years
TIG Welder2,000 to 3,8002 years
Pipe Welder (2G and 5G)2,000 to 4,0003 years
6G TIG/ARC Pipe Welder2,500 to 4,5003 years
Welding Foreman4,000 to 8,00010 years, with crew leadership
Welding Inspector4,500 to 8,5005 years, with CSWIP 3.1 or AWS CWI

Where does a helper start, and how does the climb work?

The bottom rung is the Welder and Fabricator Helper, listed at AED 1,000 to 1,700 a month (about ₹25,900 – ₹44,100, indicative). The listing says no trade qualification is needed. The work is moving steel plates and pipes, grinding weld edges where trained, chipping slag and standing fire-watch during hot work.

Above the helper sit the single-process welders. The ARC welder uses stick electrodes, the MIG welder uses a semi-automatic wire machine, and the structural welder joins beams, columns and plates. Each listing asks for two years and a practical weld test. The fabricator cuts, fits and assembles steel from drawings before it is welded.

What separates a TIG welder from a 6G pipe welder?

TIG, also written GTAW, is a precise process used on pipe, tube and plate in carbon steel, stainless steel and alloys. The TIG Welder listing asks for a TIG certificate or ITI welder training, two years of work and a practical weld test.

The pipe welder goes a step further. The Pipe Welder listing asks for three years in the 2G and 5G positions and a test in the process and position the employer needs. The 6G listing asks for a 6G qualification certificate, experience in high-integrity process piping and a practical 6G weld test. It describes the work as welding carbon steel and alloy pipe in all positions, with TIG root passes and ARC fill and cap. That is the top of the welder band, and the pay range shows it.

  • Know your process. Say plainly whether you weld TIG, MIG, ARC or a mix, and in which positions.
  • Bring your records. ITI certificates and old welder qualification test records count in your favour, as the listings say.
  • Expect a test. Most listings say you will sit a practical weld test before final selection.
  • Know your drawings. Reading isometrics, welding symbols and procedure sheets is asked for at pipe level and above.

The standards, positions and certificates behind these terms are covered in welder jobs abroad: the test decides your band, and the day itself in how to prepare for a trade test.

The test sets your band. Two welders with the same years can get different offers after the weld test. Practise the exact process and position on the listing, and ask Disha which one the employer will test.

Foreman, supervisor and inspector: what the step above the torch asks

The Welding Foreman listing asks for ten years, with crew leadership, and shows AED 4,000 to 8,000 a month (about ₹1,03,800 – ₹2,07,500, indicative). The foreman runs a crew of welders, fitters and helpers, checks fit-up before welding starts and sends defects back for repair. A related supervisor listing asks for ten years of welding and fabrication, including supervising foremen.

The Welding Inspector is a different path. The listing asks for five years of inspection experience and a CSWIP 3.1 or AWS CWI certification, and shows AED 4,500 to 8,500 a month (about ₹1,16,700 – ₹2,20,500, indicative). The inspector checks welder records, procedures and the finished weld, and writes the report in English. If you want this step, the certificate comes first.

The honest part: heat, fumes and long days

Welding in the Gulf is hard on the body. You work in noise, sparks and fumes, often outdoors, and the listings ask for hot work safety awareness: permits, fire watch, fume control and, on some jobs, confined-space rules. In the UAE, outdoor work is banned from 12:30 to 3 pm between 15 June and 15 September. Our guide to the Gulf summer midday work ban lists each country.

Living is usually shared, and the first months are tiring. Ask for the hours, overtime rules, accommodation and transport in writing before you decide; the welder listings do not set these out, so the written offer is where you will find them.

A promise is not a visa. A real welding job is confirmed by a written offer and a trade test, not by a visit visa or a promise from a stranger. If a person asks you for money to arrange your test result or to convert a visit visa, walk away. Any fee anyone asks for should be explained in writing, with a receipt, before you pay. Read the visit-visa job trap and what to do if the job changes after you sign.

You can see every open role on Disha's welder jobs hub, and the full Dubai and UAE list at jobs in the UAE.

Where Disha fits, honestly

Disha Global Workforce recruits candidates aged 20 to 41 with Non-ECR passports and a minimum qualification of 10+2, for the countries we actually serve in the Gulf, Southeast Asia and parts of Europe. We work under the authorisation of a licensed Recruiting Agent.

On this topic we can show you the written offer, with the basic wage, allowances, hours and duties, before you decide, and tell you which test the employer is likely to set. We cannot set the pay, promise selection or overrule the employer or the authorities. Whether you pass the weld test is decided by the test itself. If nothing suitable is open for your process and years, we will say so.

Not sure which band you fit?

Tell us your process, positions and years. We will say which open welder listing matches and what the employer is likely to test.

Frequently asked questions

What is the salary of a welder in Dubai?

Disha's open UAE welder listings show indicative pay from AED 1,000 for a helper to AED 8,500 for an inspector and up to AED 10,500 for a fabrication foreman. A TIG welder listing shows AED 2,000 to 3,800 and a 6G pipe welder listing AED 2,500 to 4,500 a month. The employer sets the final figure after your test, so read the written offer.

Do I need a certificate for a welder job in Dubai?

Not for the helper listing, which says no trade qualification is needed. For welder roles, listings prefer an ITI Welder or equivalent certificate and say you will sit a practical weld test. The 6G listing requires a 6G qualification certificate, and the inspector listing requires CSWIP 3.1 or AWS CWI certification.

How many years of experience does a TIG or 6G welder need?

In Disha's listings, the TIG Welder asks for two years and the Pipe Welder and 6G TIG/ARC Pipe Welder ask for three. ARC and MIG welders are asked for two years. Each listing also says you will sit a practical welding test in the process and position the employer needs.

Is welding work in Dubai hard in summer?

Yes. The UAE bans outdoor work from 12:30 pm to 3 pm between 15 June and 15 September, and welding adds sparks and fumes to the heat at other hours. Listings ask for hot work safety awareness. Ask the employer about shade, water, hours and protective equipment before you accept.

How do I apply for a welder job in Dubai from India?

Choose the open listing that matches your process and years, then send your details to Disha. If your profile fits, you go through the employer's interview and practical weld test. Disha shows you the written offer before you decide. Never pay anyone who promises a job on a visit visa or a test result.

This article describes Disha's open UAE welder listings and the UAE outdoor work rules as they stood on 16 October 2026 and is general information, not legal advice. Pay ranges are indicative and set by the employer, and rules can change, so confirm the current position with the employer and the relevant authority before you make a decision.